Clear Screen Film - Anti Reflective Window Film

All of our films are designed to be installed on the exterior side of the window. (Outside)

•  Prior to installation of Turf Shield, we recommend attaching a small piece of Turf Shield window film to glass as a test to help you become accustomed to the film's characteristics, including adhesion strength.

•  Glass surface must be clean. Use mild soap and water to clean the glass. Do not use glass cleaners with solvents (e.g., Windex®). Use 85% isopropyl alcohol, if desired, to remove any residue; allow it to evaporate completely before installing film.

•  Surface must be completely dry. Use lint-free cloth or industrial paper towels to dry glass.

•   Temperature of glass must be moderate —between approx. 40º F and 70º F .

•  In cold weather, apply film in late afternoon, after windows have warmed up. Applying film to glass that is too cold may adversely affect adhesion of film.

•  In hot weather, apply film in the early morning, while glass is still cool. Applying film to glass that is too hot can cause the film to stretch during installation.

Step 1

Lift the upper edge of the liner away from the film and fold back approximately 3-6 inches (depending on the size of the film).

Step 2

Carefully position the film so that it is properly aligned on all sides, then press the upper corners in place using light pressure.

Step 3

Using your hand or a soft plastic squeegee, lightly press the film in place.

Step 4

Working from the top of the film to the bottom, continue by peeling away more of the liner and applying light pressure to the film. Continue in this manner until the liner is completely removed and the window film is in place.

Step 5

Using a utility knife, carefully trim away any unneeded portion of the film.

Step 6

If you are installing more than one panel, follow steps 1 through 5 for each panel. Properly align each film in relation to the adjoining panel(s).

NOTE: In the case of film that must be seamed together, install the two pieces so that the edges of the film butt against each other, with the holes aligned (don't overlap the two edges of the film).

Step 7

Finally, squeegee the film from the center and work outward in all directions. Be sure to squeegee the edges firmly in place.

Step 8

Step back and admire your work!

When will I receive my order?

We handover the rolls to USPS in 1-3 days depending on the number of orders we have in the process. For the orders in the USA; it typically takes 3-5 days for USPS to deliver the roll to your address. Generally, you should be able to receive the roll in 3 to 5 days.

How much does shipping cost?

Shipping is not free. Choose the option that best suits your needs.

Do you ship internationally?

No.

Returns

To return your product, you should contact us for details. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you may vary.If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

*Sale items are non-refundable.