Reflect Defense Black - Anti Reflective Window Film

Protection Against Window Reflections

One of the unique challenges posed by modern, energy-efficient windows is their potential to act like magnifying glasses, focusing sunlight onto specific areas. This can create hot spots intense enough to cause melting and damage. Reflect Defense Window Film combats this problem by offering a barrier that mitigates the concentration of light, ensuring that reflected sunlight is no longer a destructive force.

The Best Interior to Exterior Visibility

Beyond its protective benefits, Reflect Defense Window Film's Black Film stands out for its exceptional interior-to-exterior visibility. This anti-reflective window film allows for a clear, unobstructed view from the inside out, maintaining the natural beauty of your surroundings while still providing essential protection against window reflection damage. With this film, you can enjoy the best of both worlds: stunning views and natural light flooding your interior space, combined with the peace of mind that comes from knowing your exterior is safeguarded from the harmful effects of reflected sunlight.

In summary, Reflect Defense Window Film provides an essential layer of protection against the often devastating effects of window reflections. With the convenience of being sold in 1 ft increments, this black screen exterior window film allows property owners to prevent significant damage and maintain the integrity and appearance of their exterior spaces, ensuring that turf melting, siding warping, furniture degradation, and car trim damage are problems of the past. With the added benefit of the best interior to exterior visibility, Reflect Defense Window Film's Black Film is the ultimate anti-reflective window film solution for protecting your property while enhancing your views.

All of our films are designed to be installed on the exterior side of the window. (Outside)

•  Prior to installation of Reflect Defense, we recommend attaching a small piece of Reflect Defense window film to glass as a test to help you become accustomed to the film's characteristics, including adhesion strength.

•  Glass surface must be clean. Use mild soap and water to clean the glass. Do not use glass cleaners with solvents (e.g., Windex®). Use 85% isopropyl alcohol, if desired, to remove any residue; allow it to evaporate completely before installing film.

•  Surface must be completely dry. Use lint-free cloth or industrial paper towels to dry glass.

•  Temperature of glass must be moderate —between approx. 40º F (5º C) and 90º F (32º C).

•  In cold weather, apply film in late afternoon, after windows have warmed up. Applying film to glass that is too cold may adversely affect adhesion of film.

•  In hot weather, apply film in the early morning, while glass is still cool. Applying film to glass that is too hot can cause the film to stretch during installation.

Step 1

Lift the upper edge of the liner away from the film and fold back approximately 3-6 inches (depending on the size of the film).

Step 2

Carefully position the film so that it is properly aligned on all sides, then press the upper corners in place using light pressure.

Step 3

Using your hand or a soft plastic squeegee, lightly press the film in place.

Step 4

Working from the top of the film to the bottom, continue by peeling away more of the liner and applying light pressure to the film. Continue in this manner until the liner is completely removed and the window film is in place.

Step 5

Using a utility knife, carefully trim away any unneeded portion of the film.

Step 6

If you are installing more than one panel, follow steps 1 through 5 for each panel. Properly align each film in relation to the adjoining panel(s).

NOTE: In the case of film that must be seamed together, install the two pieces so that the edges of the film butt against each other, with the holes aligned (don't overlap the two edges of the film).

Step 7

Finally, squeegee the film from the center and work outward in all directions. Be sure to squeegee the edges firmly in place.

Step 8

Step back and admire your work!

When will I receive my order?

We handover the rolls to USPS in 1-3 days depending on the number of orders we have in the process. For the orders in the USA; it typically takes 3-5 days for USPS to deliver the roll to your address. Generally, you should be able to receive the roll in 3 to 5 days.

How much does shipping cost?

Shipping is not free. Choose the option that best suits your needs.

Do you ship internationally?

No.

Returns

Custom Cut 1 Ft Increment rolls are all final and non-refundable.

To return your product, you should contact us for details. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you may vary.If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

*Sale items are non-refundable.